Description
Rail Information (1 Qty):
- The standard 12.2” high rail is welded to two plates on each side.
- Each plate has two pre-punched slotted holes for connection.
- Secured to the post using 4 bolts per rail (12 mm D x 160 mm (6- 3/10’’)).
- Mounted between the inside faces of the posts.
- Pre-galvanized and powder-coated dual-layer protection
- Safety yellow finish (RAL 1023)
- When properly installed, rated to withstand a 10,000 lb. impact at 4 mph
| Material | Height | Thickness | Finish | Bolts |
| Galvanized Steel | 12.2” | 11-GA (0.118”) | Powder-coated Safety Yellow (RAL 1023) | 4 bolts (12 mm x 6-3/10″ ) |
| Nominal Length | Exact Length (In) | Weight Ea (Lbs) |
| 2ft | 19.28 | 16.57 |
| 3ft | 31.28 | 24.07 |
| 4ft | 43.28 | 31.57 |
| 5ft | 55.28 | 39.10 |
| 6ft | 67.28 | 46.58 |
| 7ft | 79.28 | 54.10 |
| 8ft | 91.28 | 61.58 |
| 9ft | 103.28 | 69.10 |
| 10ft | 115.28 | 76.59 |
Note: Nominal length is measured center to center of posts.
Rail Hardware Kit Information (1 Qty):
- Post to rail connection.
- (4x) M12 x 1.75-160mm (6-3/10″) hex head bolt. Grade 8.8
- (8x) M12 washer. Grade 8.8
- (4x) M12 Hex nut. Grade 8.8
