Quick answer: Warehouse and industrial guardrail systems are bolt-down steel posts and rails that stop forklifts before they hit people, racking, walls or equipment. Our heavy-duty system is rated to withstand a 10,000 lb impact at 4 mph when properly installed, comes in single height (19″ posts) and double height (41.5″ posts), and starts at $273 for a starter kit. Most orders ship within 2 to 3 business days from our Dallas warehouse. Call 817-961-9471 or request a free quote.
Every Guardrail Online system uses the same heavy-duty steel components, so you can mix single and double height runs across one facility. Posts bolt straight to a concrete floor and rails bolt between them, which keeps installation simple for maintenance teams and contractors.
| Specification | Detail |
|---|---|
| Impact rating | 10,000 lb at 4 mph when properly installed |
| Single height post | 19″ high, rail at 17.61″ |
| Double height post | 41.5″ high, rails at 17.61″ and 40.16″ |
| Post section | 4.72″ x 4.72″ x 3/16″ steel |
| Base plate | 10″ x 10″ x 5/8″, four 5/8″ x 5″ wedge anchors per post |
| Rail | 12.2″ high, 11-gauge pre-galvanized steel, safety yellow powder coat (RAL 1023) |
| Rail lengths | 2 ft to 10 ft nominal, measured center to center of posts |
Single height starter kits start at $273 and double height starter kits start at $473. Most orders ship within 2 to 3 business days from our Dallas warehouse on Valley Branch Lane, to warehouses across Dallas-Fort Worth, Houston, Austin and San Antonio. Orders over $10,000 qualify for volume pricing.
Planning the install yourself? Follow our step-by-step warehouse guardrail installation guide. Forklift guardrail is impact protection, not fall protection, so see our guide to OSHA guardrail requirements for mezzanines and dock edges.
Get a free quote or call 817-961-9471 to plan your guardrail layout.
Single height starter kits start at $273 and double height starter kits at $473, with add-on kits to extend a run. Final cost depends on run length, height and number of corners or gates.
Single height uses a 19″ post and one rail to stop forklifts at floor level. Double height uses a 41.5″ post and two rails to stop forklifts and also keep people out of a hazard area.
When properly installed, our heavy duty guardrail is rated to withstand a 10,000 lb impact at 4 mph.
Yes. Start with one starter kit, then add one add-on kit per extra section. Single beams, posts, angle adapters, lift out adapters and gates are also sold separately.
Posts are anchored to a sound concrete slab with the included post hardware, then rails bolt between the post faces. Plan the layout and check the slab before drilling.
Yes. Orders ship from our Dallas warehouse at 12917 Valley Branch Ln, Dallas, TX 75234 to sites across Dallas Fort Worth, Houston, Austin, San Antonio and the rest of the US.
sales@guardrail.online
| Monday to Friday | 8:00 AM to 5:00 PM |
| Saturday and Sunday | Closed |
Serving warehouses and distribution centers across Dallas-Fort Worth, Houston, Austin and San Antonio, with shipping across the contiguous United States.